Hardwood Flooring for Kitchens-Pros and Cons
Hardwood Flooring is the most attractive and sought after flooring material across the globe. However, with every luxury comes the price to keep it well-maintained. Same is the case with hardwood flooring; since it needs a lot of care and high maintenance therefore it is considerably difficult to contain. Multiple structural engineers and flooring professionals do not suggest wood flooring in places which relatively more humid and wet in particular. Since the wood cannot repel humidity, therefore, it better to go with other traditional choices such as marble or stone flooring.
Hardwood is easily discolored by water or other liquid substance. However, some wood flooring manufacturers claim that their product is water-resistant, yet it is not pre-written on any product whatsoever. Perhaps the manufacturers always caution against the installation of wood flooring in the rooms where the wet condition are inevitable especially. HiTrueCare has jotted down a list of pros and cons that are associated with hardwood flooring in the kitchens. Keep reading to find out every thing you need to know about wood flooring.
The Pros and Cons of Hardwood Flooring
- Provides the surface with a luxurious attraction.
- Relatively easier to refurnish.
- Have a positive impact on the overall value of a home.
- Keeps the house warm in cold regions.
- Damages are inevitable.
- Not resilient to water and humidity.
- Maintenance costs are slightly on the higher side.
- Difficult to install if you are not a pro. Not recommended for DIY installation.
- The per square foot cost is higher as compared to marble or stone.
Types of Hardwood Flooring
Let’s find out the different types of hardwood flooring that are prominent and widely used across the U.S. There are a number of factors that drive the selection of hardwood flooring of a particular type. Some of the aspects are Cost, maintenance, installation, inbound area, region, etc. Let’s dig a bit deeper to learn and understand the common hardwood flooring types.
Solid Unfinished Planks
Installing solid hardwood planks, then staining and finishing them in place, gives the best possible wood flooring for a kitchen. With this installation, the boards hold tightly together and finally they are covered with a sealer coat over the entire surface. This sealer coat provides protection that guarantees to block any liquid substance to penetrate. These hardwood planks also offer you a great advantage i.e. the sandpaper can be applied to them to refurbish them a number of times. Furthermore, these hardwood floors are famous for their long-lasting lives that span over a hundred years. It is the best form of hardwood for kitchens, despite their rapidly increasing rareness.
Solid Prefinished Planks
Since we are living in the 21st century where the rarest thing is time. Everyone is on the tight schedule that they don’t have much time to spare for anything. Keeping in view this point, the manufacturers have now started to produce prefinished planks. These planks promise to save some finishing time that would otherwise be required for the raw planks. The planks are produced with sanding, sealing, staining, and finishing right from the factory. Therefore you only have to install them in your space without having to go through these hectic activities.
Engineered planks are created by bonding a thin veneer of hardwood at the base of plywood or MDF. This type of flooring also lies in the prefinished hardwood category. The planks are usually integrated with a “click-lock” system that enables the planks to interlock at the edges. This technology makes it possible to install the planks as a floating floor with absolutely no attachments with the sub-floor. Since the planks are pre-finished as well as engineered, therefore, it makes this type to be the easiest one for DIYers to install.
This type of plank is made from the salvages material of the factories, offices, or bowling alleys that are demolished. The wood obtained from the debris is re-engineered or recycled to make it reusable. Also, this process is an eco-friendly as the waste from demolished places is recycled and reused. These days we often come across the larger communities who have retailers that specialize in recycling the building materials. If applied with care – so that the planks are tightly coupled and well coated with sealants than the reclaimed planks are a good choice to be installed in the kitchens.
Hardwood Flooring Installation
There were times when the whole hardwood flooring was done with unfinished planks, but the industry has seen massive advancements. With the introduction of engineering in this industry, we are now privileged to get prefinished and engineered hardwood planks right from the production unit.
The installation process for hardwood flooring is not the same for every type of plank. The process varies with each type. To start with, let’s have a glance at the installation process of solid hardwood planks.
How to install Solid Hardwood Planks
They are milled with a tongue-and-groove design that allows the planks to lock at the edges. They are connected to the subfloor with the nails that are driven down through the edges of the boards and ultimately into the subfloor. The nails are stuck into the planks using a specialized process known as “blind-nailing” assisted by a special nailing tool.
How to Install Engineered Harwood Planks
Engineered hardwood which is also a prefinished type of hardwood is attached with the help of the modified tongue-and-groove system. As mentioned earlier it is often termed as “click-lock”. These floors are generally the floating floors as there is a lock at the edge of the plank that enables it to tightly hold the other plank. These planks lay on a thin dense foam underlay mat without any attachment with the subfloor whatsoever. This technique also enable the planks to contract and expand with changing climates without crumbling.
Post Installation Phase
Once the installation is done, the planks are stained by hand and coated with a polyurethane varnish. This varnish keeps the planks from getting moisture and stains. The wood flooring professionals suggest renewing the varnish every few years, especially where the moisture is relatively higher such as kitchens.
Who Should Install
The solid hardwood flooring planks are usually installed by professionals as the process is quite tricky and requires professionalism. Specialized tools are used in the process that could not be used without having any practice and knowledge. Contrary to this, the engineered hardwood flooring could be done by yourself as the planks used in the process are prefinished and don’t require any technical work to be done.
Hardwood flooring is a very attractive and decent flooring for any place such as home, office, restaurant, etc. There are different types of hardwood flooring planks produced these days that could be used anywhere. However, the process of installation may vary for different types. Though the hardwood flooring looks elegant, yet it requires a lot of care. Although the maintenance is rather easier than the concrete/tile flooring, yet the cost of maintenance is relatively much higher. So we conclude on the remark that the wood flooring despite having benefits also bears some disadvantages due to its fragility.
Find out more here.