Water Heater Safety Tips You Should Know
A water heater is usually kept in a place where hardly anyone goes in the house, maybe in the top tier of the house or in any backyard. But remember, it is a home device that regularly needs maintenances for all the good safety reasons.
It is an every household device with water tanks and keeps the water temperature as warm as one needs. It is usually affordable and needs of every house these days, thanks to technology!
We really enjoy the warmth of the water in winters but what if the water suddenly starting to stop heating the water, all the fun can dramatically change into chaos when you have to go office early in the morning and there isn’t any warm water at all.
So here are some tips you need to regularly keep checking.
Water Heater Should be Properly Ventilated
The proper ventilation is so important in the water heater that if the vents are not good enough, the fumes or dust can go back instead of going out from vents. The vents should go straight up and out without any interruption. Make sure the diameter of vents and diameter of the tanks drafts should be of the same size, otherwise ventilation problems will occur again and again.
Regularly Check your Temp/Pressure Rate
The temperature/pressure plug is designed to keep your water heater from explosion if the pressure and temperature go above safe limits. You must check the valve once or twice a year. When u pull up the handle, water should flow freely and stop when you release the handle of the valve. If there is an issue, your value needs rapid replacement.
Keep the Fire Hazards Away from Water Heater
The water heater is generally supported by gas. You should need to check if there is any fire-catching thing, remove it from there and keep it in any other safe place. Storing combustible things near a water heater is a clear suicide. Things like garbage, matches, coats, canisters of gas should be kept away from the heater immediately.
On residential tanks, the settings are normally warm, hot, and very hot or something relevant. There is some variation but the temperature should be kept close to 120 degrees.
It is very important to keep the temperature level around 120 degrees to kill the germs. The skin of babies and children is comparatively thinner than the adult that’s why it burns faster. It’s better to check the water temperature using your wrist or a palm whenever you bathe a baby.
Remember, when going on to vocation you have to set the temperature at the lowest readings. Maybe it’s better to power off the water heater and gas when no one is in the home for all the safety precautions.
These are a few details you need to know about the water heater, remember its gas-supported device; it can blow up the whole house, so safety precautions need to be taken seriously.
If you have any advice or information to say, feel free to comment below and be informational.